-
1. Design speed: 200-250m/min, width of 1800mm-2500mm
2. Automatic control of computer interface PLC, the number of heating plates and the pressure size of automatic switch, so as to ensure the good condition of the corrugated peaks of different grams of heavy corrugated paper.
3. The surface of the heating plate is treated with the eye film and hard chromium plated. 600 mm wide. 18-22 block options.
4. Thermal pressure plate structure can be used to adjust the pressure (opt...
-
※NC-1800 COMPUTER SHEET CUTTER MACHINE
※Structural features:
★Can save 200 sets of orders, replace the cutting specifications quickly and accurately, non-stop for a single, and can achieve computer networking, easy production management.
★Knife shaft drive gear with eccentric shaft installation, to achieve no backlash drive, high transmission accuracy.
★Cross-cutting knife with inserts steel blade. Fixed blade blade flat structure, more stable, more suitable for cuttin...
-
1. 360E design speed: 200m/min 320E design speed: 180m/min
2. Effective width: 1400mm- 2200mm.
3. Corrugated roller diameter: φ360mm φ320mm
4. Adopt negative pressure type design, so that the core paper can be uniformly pressed and attached to corrugated surface, evenly coated with glue to make the single corrugated corrugated paper better.
5. Fast change roller, 10 minutes, replace the corrugated roller with electric trolley, into the machine, fixed on the machine bas...
-
1. Effective width: 1400mm- 2500mm, design speed: 200m/min-250m/min
2. Maximum heap height: 250mm maximum stack length: 3500mm
3. Gantry stack. Change the single time 5 seconds, can automatically count, automatically roll out, automatic change.
4. Synchronous with the raw tube system, order management, centralized management, and no slow automatic change of orders.
5. The waste of raw tube is less than 700mm
6. Crawler stacked platform, ac servo control elevating...
-
1. Design speed: 150m/min
2. Applicable maximum diameter of original paper: 1500mm
3. With the automatic tension control of the original paper frame, high speed of paper can be connected with high efficiency.
4. Paperless tail paper, reduce the loss of the original paper. (the overlap of the original paper is only about 40mm with the width of the tape.)
5. When the paper car is moved out, it will automatically turn out and take vacuum adsorption, easy to install the pa...
-
1. Diameter of preheating roller: phi 600mm, phi 900mm, phi 1000mm, phi 1100mm optional.
2. Effective width: 1400mm-2500mm
3. Electric Angle, adjusting range of 360 ° arbitrary rotation, optional 2 root Angle shaft, increasing the Angle area.
4. The surface of each roll is precision grinding and hard chrometreatment, clean and durable.
5. Use disc seal head design to ensure that the original paper is evenly heated.
6. Single or multi-layer configuration.
...
-
This production line is available in large amount automatic production, which can produce corrugated paperboard correspond to national standard with high quality, and adopted concentrated control, operarated and repaired easily, safely, reliable, reducing manpower, This production line adopts international energy saveing technology with oil heating, which can saveing 40 percents energy than steam heating, So this can reduce costs effectively. It's an economical production in big, middle paper...
-
1. Effective width: 1600-2200mm
2. Maximum speed: 150m/min
3. The number of slitting knives: 5
4. Minimum slitting width: 180mm
5. Cutting time: 3-8s
6. Blade accuracy: 0.5mm
7. Cross-cutting length: 300~9999mm
8. Crosscutting accuracy: 1mm (constant speed)
9. Stacking height: 250~600mm (according to customers' needs)
10. Maximum carton length: 1600mm
11. Constant tension paperboard conveying speed is strictly synchronized with the s...