-
1. Design speed of SF320C: 150m/min SF360C design speed: 200m/min
2. Effective width: 1400mm-2200mm
3. Corrugated roller diameter: φ320mm φ 360mm
4. Drive the gearbox to lubricate the oil, reduce the noise, the universal joint drive, and isolate the power source (optional).
5. Upper roller, pressure roller and rubber roller lift, all with pneumatic control.
6. The guide paper adopts vacuum adsorption, with air volume adjustment device, to maintain the stability o...
-
1. Design speed: 100m/min.
2. Effective width: 1400mm- 1800mm.
3. Corrugated roller: φ 280mm.
4. The driving reducer adopts oil penetration lubrication, reducing noise, universal joint drive and isolating power source.
5. Upper roller, pressure roller and rubber roller lift, all with pneumatic control.
6. The guide paper adopts vacuum adsorption, with air volume adjustment device, to maintain the stability of corrugated type in
high speed.
7. The roll...
-
1. Mechanical speed: 80m/min.
2. Effective width: 1400mm- 2000mm.
3. Adopt the hood type structure, with high pressure and powerful fan, and the air absorption and silencing equipment.
4. Wall cast iron structure, wall thickness 130mm. Independent gearbox, universal shaft drive.
5. he material of corrugated roller is 48CrMo alloy steel, which is tempered by adjustment, medium frequency quenching, surface polishing and chrome, the diameter of corrugated main roller is p...
-
1. Work width: 1400mm-2200mm
Working speed: 100m/min-180m/min
2. Longest paper length: 3000mm-3500mm
3. Automatically stack and collect cardboard.
4. Electric lateral output, rear baffle position electric adjustment.
5. The longitudinal paper adopts wide conveyor belt conveyor.
6. When the cardboard number or height is required, the cardboard will be removed automatically or manually.
...
-
1. Design speed: 120m/min
2. Effective width: 1400mm-2200mm
3. Knife wheel configuration: four knives, six lines, five knives eight, six knives ten lines.
4. Adopt novel thin knife high-speed cutting paper with smooth and smooth incision.
5. Automatic sharpener system can realize the production process, constant grinding knife blade, pneumatic control knife device, can be based on the material or the repair condition at any time to set the interval meter and the time o...
-
1. Mechanical speed: 200m/min, 250m/min. Effective width: 1400mm-2500mm
2. Can store 999 sets of orders, and realize automatic exchange of orders or manual change without shutdown.
3. Arbitrary servo control of slitting knife and line wheel, the list is fast and accurate.
4. The front and rear pressure line wheel is configured, and the pressure line wheel can realize zero voltage.
5. Automatic tracking of production line speed to ensure its synchronization with product...
-
General Features:
Quality: Due to high requirements for mechanical quality, raw materials selection, processing, assembly of industrial control over the industry standard, using the new design, quality management system, comprehensive tracking to every detail, delivery to the customer in both hardware and software are a high quality equipment.
Efficiency: Patent type feeding width automatic adjustment device and printing locking device with screw. With 4.0 engineering desi...
-
1. Using double - rod cylinder symmetry four arms structure, can support two volumes of original paper at the same time.
2. Through the hydraulic transmission mode, the clamping, lifting and deviation of the paper roll are realized.
3. The top end adopts multi-point brake or manual tension brake. The top adopts the tooth-shaped chuck to reduce the waste of paper.
4. The width of the original paper is from 1200mm to 2800mm and the diameter of the supporting paper is 1500mm.
...
-
1. Design Speed: 100-150m/min; Effective width: 1400-2200mm
2. Can store 200 sets of orders, change the cutting paper specifications quickly and accurately, do not stop changing the order, and can realize the computer networking, facilitate the production management.
3. The gear shaft transmission gear adopts the high frequency quenching of fine forging steel material to realize the no-side gap drive, and adopts the advanced seamless connection mode and the transmission precision ...
-
1. Design speed of 250m/min, with a diameter of 320mm
2. The rotation of each layer of pasting wheel is controlled by the inverter motor, which is controlled by the frequency converter to ensure the synchronization of each layer of paste speed and can be operated separately.
3. Since the rotation of each layer of the paste wheel is controlled by the variable frequency motor, it can still be controlled by the frequency converter with the same speed on the same line as the converter...
-
1. Design speed: 200-250m/min, width of 1800mm-2500mm
2. Automatic control of computer interface PLC, the number of heating plates and the pressure size of automatic switch, so as to ensure the good condition of the corrugated peaks of different grams of heavy corrugated paper.
3. The surface of the heating plate is treated with the eye film and hard chromium plated. 600 mm wide. 18-22 block options.
4. Thermal pressure plate structure can be used to adjust the pressure (opt...
-
※NC-1800 COMPUTER SHEET CUTTER MACHINE
※Structural features:
★Can save 200 sets of orders, replace the cutting specifications quickly and accurately, non-stop for a single, and can achieve computer networking, easy production management.
★Knife shaft drive gear with eccentric shaft installation, to achieve no backlash drive, high transmission accuracy.
★Cross-cutting knife with inserts steel blade. Fixed blade blade flat structure, more stable, more suitable for cuttin...