I.Name：Fully automatic multilayer flute laminator（Two in one or Three in one)

II.Model：HRB-1300/1450/1600F

III.PRICE: HRB-1300F:  USD62,000/SET FOB TIANJIN

IV.PAYMENT: 30% T/T IN ADVANCE, BALANCE PAID BEFORE SHIPMENTD

V.Specification

Name	Requirement		Requirement		Requirement
Model	HRB-1300F		HRB-1450F		HRB-1600F
Max. Paper size（W*L）	1300*1200 mm		1450*1200 mm		1600*1200 mm
Min. Paper size（W*L）	600*600 mm
Face paper thickness	250-500 g/m2（standard paper board）
Flatness requirements onface paper	Curve height should less than 0.2 times of paper thickness
Requirements on film	Film ends should be less than 2 times of paper thickness
Bottom paper	A、B、C、E、F flute
Flatness requirements on bottom paper	Within 15/1000 mm
Corrugated paper deflection	Curve height should less than 0.2 times of  paper thickness, deflection should be less than 2times of flute height
Requirements on the height of corrugated flute	If there is difference between tow flute, difference should be within 1/20 of the corrugated height
Diagonal requirement	Less than 3/1000 mm
Size requirement on face paper and bottom paper	Size of face paper should be 8 mm larger than that of the bottom paper
Laminate layers	Face paper+corrugated paper=3 layers or Face paper+corrugated paper+corrugated paper=5layers（total thickness less than 10mm）
Precision	±1.5mm（according to the paper quality）
Speed	100m/m（theoretical value ）			90m/m（theoretical value）
Production efficiency	0-6000 sheets/h			0-5000sheets/h
Height of face paper pile	1600 mm
Face paper table capacity	1500 KG
Height of bottom paper pile	400 mm
Total Power	33 KW			34 KW
Voltage	Three phase 380V
Efficient pressing length	6000mm
Conveying height	250mm
Adhesive medium	Corn starch glue
Collecting table size（W*L）	1300*1300mm			1450*1300mm		1600*1300mm
Collecting table capacity	300 KG
Dimension（L*W*H）	22000*2200*2500mm(Subject to machine)	22000*2400*2500mm(Subject to machine)				22000*2550*2500mm(Subject to machine)
Machine Weight	About 7.5T(Subject to machine)	About 7.8T(Subject to machine)				About 8T(Subject to machine)

In order to ensure the safe use of the machine, please connect the ground line according to the requirements.

VI. Introduction:

HRB-FMB series fully automatic multilayer flute laminator is consists of automatic face paper lifting section, face paper conveying section, double bottom paper synchronized or asynchronized conveying section, double bottom paper positioning section, cyclic gluing section, pressing section, delivering section and automatic collecting section. It suits to laminate the printed paper to the corrugated board or cardboard which is thicker than 350gsm, with features of high precision and high speed. It is the ideal laminating machine for all kinds of packaging company domestic and overseas.

VII. Machine structure:

1. Face paper conveying section adopts advanced four sucking and four delivering feeder, with the help of high pressure vacuum pump it can feed the face paper 200-500gsm efficiently. Pre-loading structure reduce the face paper loading time greatly.

2. Position displaying hand wheel on the face paper pile loading section makes the loading action more accurate and more convenient for the bottom paper loading at the same time. Limited switch fixed on face paper loading section makes the moving up action more accurate.

3. Conveying belt, pressing roller and automatic chasing lay all do help to the face paper delivery. Pressing roller adopts the specialized roller which is used on print machine, it can delivery both thick and thin paper effectively. Anti-curl structure helps to delivery face paper at the same time.

4. Both bottom paper feeding section adopt vacuum sucking belt with high strength and high friction allowing the non-stop feeding. Rotating paper supporter equipped on this section makes it possible to feed the long sheet.

5. Knurled roller on the bottom feeding part makes sure the stable running when the machine in a high speed.

6. Chasing lay and high-speed axial flow fan differential positioning system is applied on the bottom paper feeding part. You can adjust the front and back position without stopping the machine. Synchronous slot design can control the bottom paper feeding in a minimum range; Chasing lay can make sure a good bottom sheet feeding when the machine is running at a high speed.

7. Gluing system has liquid induction device, glue will be supplied accordingly and will be recycled, glue cost will be reduced greatly.

8. The gluing system in this machine is a combination of anilox type steel roller and rubber glue even roller in which the rubber glue even roller is core structure designed and  differential speed gluing method is applied to make a even glue and increase the gluing quality. Averagely 25-35grams glue will be used on one square meter, reducing the cost and improving the laminated paper board quality.

9. Both bottom paper and face paper adopt front elastic registration lay so that there is no need to readjust for big or small paper. The intelligent control system makes it possible to adjust the face paper position automatically when the machine is in running. The digital instrument on the front lay part can make the front lay adjustment range to 0.1mm.

10. Photoelectric detector helps the conveying of top or bottom paper accurately..

11. Grooved steel positioning wheel has long service life and easy to clean.

12. Double pre-pressing roller are equipped on the laminating unit.

13. Automatic damping system is applied on the bottom sheet feeding system to prevent the curving of the laminated sheet.

14. Two  pressing conveyors with differential speed are equipped on the machine to prevent air bubble and gluing failure problem.

15. Floating type pressing conveyor makes it possible to adjust the pressure according to the paper board thickness. The pressed paper board is solid and strengthen.

16. Automatic collecting device can reduce the labor intensity effectively.

17. All the electrical components are imported; PLC and HMI control system are safe and reliable. Many control knobs are equipped on the machine according to the ergonomics allowing you to control the machine in different position; machine speed is controlled by the frequency converter which makes the machine run stably.

18. Machine is driven by imported timing belt and wheel gear with high efficiency, low noise and stable running status. Low production cost and convenient maintenance.

19. Stainless steel is applied on the corrodible part of the machine, it can prevent the corrosion from the glue.

VIII. Configurations:

NO.	Name	Brand	Quantity
1	Touch screen	Siemens	1 piece
2	PLC	Siemens	1 piece
3	Servo motor	Dorna	2 sets
4	Frequency converter	Delta	5 sets
5	Main motor	China	2 sets
6	Lifting motor	China	2 sets
7	Pressing motor	China	2 sets
8	Clutch/Brake	China	1 set
9	Chain	Renold	30 meters
10	Timing belt	Gates	14 pieces
11	Contactor	Honeywell/Schneider	8 pieces
12	Relay	Honeywell/Schneider	15 pieces
13	Button switch	Schneider	25 pieces
14	Sucking belt	NITTA	10 pieces
15	Conveying belt	SEIGLING	8 pieces
16	Fan	CHINA	2 sets
17	Bearing	KGF（Key points）	100 pieces

IX. Attached spare parts and tools：

NO.	Name	Quantity
1	Approach switch	1piece
2	Limited switch	1piece
3	Photoelectric switch	1piece
4	Relay	1piece
5	Separator	6pieces
6	Suction nozzle rubber	8pieces
7	Pressing wheel	8pieces
8	Grease gun	1piece
9	Oil gun	1piece
10	300Monkey Wrench	1piece
11	150Monkey Wrench	1piece
12	Open spanner 10-12	1piece
13	Open spanner13-15	1piece
14	Internal hexagonal wrench	1set
15	TOP Tape measure 3M	1piece
16	Sharp-nose pliers	1piece
17	Big pliers	1piece
18	Glue Barrel	2pieces

X.Packaging：

1.Rust prevention will be made on export machines, it can be eliminated when it is sent to other cities within China.

2.The packaging will meet the waterproof standard, the packaging material and structure will suit to the transportation and loading.

3.Transportation and loading things will be guided by the technician from HRB PACK GROUP CO.,LTD

4.The products should be stored in dry and ventilated areas, avoiding damp and corrosive chemicals.

XI.Manufacturing requirements:

1.Machine is made according to the standard request and the specified design.

2.Purchased part, cooperation part and raw material all meet the relevant standard.

3.Completesafety protectdevice are equipped on the machine and the alarm warning will be given before starting,multiple emergency stop devices will be find on the machine.

4.Tidy wiring, complete, correct and ordered signs will be seen on the machine, joints are firm and will not loose easily

5.The whole machine runs smoothly under working condition, the operating mechanism is flexible and reliable, the actuator is accurate and without stuck and dislocated phenomenon.

6.The grounding position of machine body is obvious and convenient.