1. The machine up and down by rubber roller,pneumatic pressure,on-site operation.Gear rack,etc.

2. The last line of the machine is heating board after cooling compaction device,the pressure can be adjusted according to the quality of the paper and relevant conditions.

3. Rubber roller diameter is 500mm,up and down roller body of wall thickness of 30mm,can prevent the compression deformation of the roller body.Hang glue unilateral 15mm thickness hardness is 75-80,hanging plastic material with nitrile butadiene rubber,high acid and alkali resistant strength,make the rubber roller is not easy to deformation,long service life.

4. 11KW variable frequency drive motor for gear motor.

5. Is the role of tractor adhesive paper paper uniform velocity of the cutting machine and then transported to cross-cutting machine,make its crosscutting even wothout error.

6. Cutting department structure characteristics.

7. Fine grinding processing blade knife shaft diameter 124mm to pick a spiral groove to prevent the knife dish sliding do dynamic balance processing.

8. Equipped with three groups of longitudinal cutting knife,blade with diameter of 320mm large circular knife material of 45# manganese steel,no burrs after cutting the cardboard is neat,the blade sharp and durable,paper neatly.

9. Gear motor adopts 2.2KW inverter,independent drive,frequency control of motor speed can track the whole production line speed synchronization operation more convenient,the main power supply from cross-cutting knife work station.

10. The machine adopts automatic correction method,automatic tracking correction,ensure that the size of the edge points,effectively cooperate with cardboard running deviation,reduce the waste of paper.