suitable for straight-line, crash-lock bottom, double wall, 4 & 6-corner boxes
Return to product list Video link:HRB EUROPE Automatic High Speed Four Six Corner Folder Gluer
GS series |
650GS |
800GS |
1100GS |
Carton board max. |
800 gsm |
800 gsm |
800 gsm |
Corrugated flute type |
N, E & F |
N, E & F |
N, E & F |
Capability |
|||
Speed max. |
400 m/min |
400 m/min |
400 m/min |
Inching speed |
10 m/min |
10 m/min |
10 m/min |
Thickness of folded box max. |
12 mm |
20 mm |
20 mm |
Blank width |
650 mm |
800 mm |
1100 mm |
Dimensions & weight |
|||
Length*Width*Height |
12*1.4*1.8m |
16.5 *1.4*1.8m |
16.5*1.7*1.9m |
Net Weight |
4T |
6.6T |
7.6 T |
Electrical connected load |
12 kW |
15 kW |
15 kW |
Compressed air |
6 bar |
6 bar |
6 bar |
Air compressor capacity |
10 m³/h |
10 m³/h |
10 m³/h |
Air tank capacity |
60 L |
60 L |
60 L |
Common type and size
Carton type and size: |
|
|||
Model |
650Type |
800Type |
1100Type |
|
A |
650-100 |
800-100 |
1100-100 |
|
B |
500-60 |
800-60 |
800-60 |
Size of two-sides glue box and folded box |
|
|||
Model |
650Type |
800Type |
1100Type |
|
A |
500-100 |
800-150 |
1100-250 |
|
B |
400-60 |
800-60 |
800-60 |
|
H |
150-20 |
150-20 |
150-20 |
Size of bottom-locked carton and folding carton |
|
|||
Model |
650Type |
800Type |
1100Type |
|
A |
650-146 |
800-146 |
1100-250 |
|
B |
450-60 |
700-60 |
700-80 |
|
H |
180-20 |
180-20 |
100-25 |
Size of 4 corners box and folding box |
|
|||
Model |
650Type |
800Type |
1100Type |
|
A |
500-120 |
800-120 |
1100-120 |
|
B |
400-120 |
800-130 |
800-130 |
|
C |
150-20 |
150-20 |
150-20 |
Size of 6 folds box and folding box |
|
|||
Model |
650Type |
800 Type |
1100 Type |
|
A |
500-120 |
800-120 |
1100-250
|
|
B |
400-100 |
800-130 |
800-130
|
|
C |
150-30 |
150-30 |
150-30
|
Feature introduction
Feeder section |
|
Independently motorized servo motor control,simultaneous feeding mode with the mainmotor. |
|
Operators can operatefeeder switch in any regional. |
|
Rail width can be horizontally adjusted and set by seven pieces 30mm thickened feeding belt and 10mm metal board. |
|
Feeder section equipped with three pieces feeding knife,adjust the asymmetrical lengths as per the box samples. |
|
Embossing drive wheel guide the feeding section belt,side feed gates in the right and left are adjustable according to the products. |
|
Vibration device coordinate with motor which helps machine consecutiveand automatic feeding quick and simply. Feeder section can stack 400MM height paper board. |
Aligner section |
|
The paper board sent from feeder section will be corrected by aligner section to ensure transmission accurately. |
Pre-folding section |
|
Special first folding line pre-fold 180°. third line 170° , |
Crash lock bottom section |
|
Complete set of folding hooks and helixes to fold the front flaps of the blank smoothly and accurately. |
|
Sectional-type upper belt board with special design,which can be adjusted according to the products type ,no need to tension belt. |
Folding and Closing section |
|
The Second and fourth folding line 180° |
|
Folding and closing section transmit from right and left side ,the belt speed can be adjusted separatelyand correct the way of box running to ensure straightly delivery. |
Lower gluing unit |
|
Optional lower gluing tank in the right and left side with large volume. |
|
Optional lower gluing tank in the right and left side with large volume. |
|
Electronic upper gluing system by guns.。 |
Trombone section |
|
Up and down belt can be adjusted separately. |
|
Equipped with photo electronic counting device and kicking paper device,which can press the paper after accounting and make it easy to pack . Also equipped with feeding paper inspection device. |
|
Press section |
|
Equipped with special additional sponge belt for the press of boxes valley part. |
|
Upper section moves back and forward, allowing for different box length. |
|
Pneumatic pressure regulator ,which can effectively ensure the uniform of fitting pressure,makes machine easy to adjust. |
4 and 6-corner device |
|
Machine using motorized and united electronic back folding system with intelligent servo motor technology. |
Servo-motor of back folding device |
|
Two driven shafts allow a precise fold of the rear flaps. Easy to setup through the main touchscreen. |
|
Spraying System |
|
|
Equipped with three guns, convenient in the production of 4/6 corner box and various special-shaped box, gluing quickly and accurately sizing. |
Box design and samples |
|||
|
|
|
|
WhatsApp:+86 18134077135
Skype :nerozhang1988
QQ:1342694539
Email:jack@hrbpack.net
Wechat :+8618134077135 Jack Zhang
Mobile Phone Number:+86 18134077135
ADD:Industrial Zone ,East of Dongguang County,Cangzhou City,Hebei Province,China